Quote:
Originally Posted by dzz
Ezaircon4jc and Unspec:
1. how do you remove either the screw or some sort retainer clip that is going in the hole on the pic below where arrows are pointing (I should have removed plastic wrap before taking a pic, but it should be clear). Or better question is, how do you remove the signal itself from the side mirror housing?
2. how do you remove the entire side mirror? I'd like to avoid cutting the wires if I don't really have to and I'd rathe use included plug
|
There is a screw once you get the cap off. Unspec removed the mirror to access the factory plug; I just cut, soldered and used heat-shrink. Removing the light bar wasn't easy, I had to encourage it a little to release. Installing also took a bit of persuasion. Maybe it's easier with the mirror off the car.
https://www.newtis.info/tisv2/a/en/f...les/1VnYcc3umT