[Blue Angel]

Originally Posted by Blue Angel

OK, looking around a little... has anyone looked into using the F01 370x24 rear disc on the F10?

The G30 M Brakes use a 370x24 rear rotor, but it's a 5x112 bolt pattern. Dimensions:
https://www.bremboparts.com/europe/e...isc/09-D901-23

The F01 uses a 370x24 rear disc on 5x120. Dimensions:
https://www.bremboparts.com/europe/e...isc/09-C314-11

The dimensions look like a match to me. If the G30 M bracket works with the F10 M5 caliper, this could be a way to put the 370x24mm F01 rotor on the F10.

Anyone tried this?

I should have been more specific - the G30 M Performance brakes use the 370x24 rear rotor (and the huge 395x36 front rotor). This is an upgraded system over the regular M Sport braking package on the G30, which only uses the 345x24 rear rotor.

The only downside (if this works) is the 370x24 F01 rotor is all cast, so it's slightly heavier (but also cheaper) than the aluminum hat rotors.