Quote:
Originally Posted by Blue Angel
Thanks for the info!
My comment was relating to Unspec ordering a G30 caliper bracket to see if it works with the F10 M5 caliper.
From what I can see the M5 steel rotors are 396x24 rear, not 370x24. Can you elaborate on your setup and which caliper/bracket combo works with each rotor size?
|
REAR ONLY:
M5/M6 caliper bracket + M5/M6 or 550i Caliper +370x24 rotor + M5/M6/550i pads.
This combo is a direct fit onto any F10/F06/F12/F13 and what I am running.
If you want to run rear rotors bigger than 370x24, then you have this option:
Tronik bracket adapter + M5/M6 caliper bracket + M5/M6 or 550i Caliper +396x24 rotor + M5/M6/550i pads.
Regarding unspec's attempt with the g30 bracket, most likely it is the bracket that is the issue and not the caliper as the caliper looks very similar to what we already have, (caliper markings are 44/28 instead of ours 44/24, which leads me to believe it can accept a 28mm wide rotor). I don't think this combo has been tested and I guess we will find out when unspec does
(I can't find the thread but I'm pretty sure its either on this forum, or maybe a Facebook posting about the full G30 setup NOT being a fit on FXX)