Quote:
Originally Posted by Jozy
Hi, a little info on my car:
06/2010 F10 with $644, $6FL, $6NF
i-level is 2013
no $609 so it has the HU_CHAMP
due to the production date, i have MULF2. long story short, MULF2 is dying so i thought i would buy a combox.
got a combox, tele variant but it doesn't matter.
did the pins switching, turned on ignition, screen does not light.
ista/d it and found the most down. switched pins back to mulf2, all normal again.
perhaps it's the coding, so put back the combox and put on esys.
changed the FA to add $6VC, changed prod. date to 0311, activated FA no problem.
read ECU, list is missing the most network modules such as HU_CHAMP
read SVT, list is with the most network modules but still shows MULF despite having 6VC
i have even tried adding $609 but nothing works to get CMB_MEDIA to show.
can someone offer any tips?
thanks in advance.
shawnsheridan  |
Read ECU should show all MOST Bus Modules. Make sure Motor is running. If they are missing, It is a hardware issue. Make sure all MOST Connections are terminated.