Quote:
Originally Posted by Techgeek80s
Dude that’s a kick ass feature def wanna see how this night vision mod end
|
Mod For Night Vision is done. Search for DIY Night Vision thread i have posted. Main thing is to acquire Camera and ECU FROM SAME DONOR CAR! You can put a request out on the Recycling yards nationwide for like 10 or 15 dollars and junk yards will contact you back with results. I paid 1000 for Camera and ECU from a 7 series which is cross compatible with 5 Series. Then plug in the harnesses, new air guide on front of car, which requires bumper removal and safety brace. Some manipulation of support pieces let you skip the
www.bmwtis.com instructions. Then run cables into car through Grommet in Firewall and finally you will have to add THREE wires into the back of the quadlock FBAS+- and Shield. Quadlock to NV ECU and then PIN 46 and 47 into the Main Computer loop for the system wide recognition of the ECU. You MUST have an emulator to make all of this work as it is not possible to add NV to a car that did not come from Factory without Emulator.