View Single Post
      01-31-2013, 11:41 PM   #16
Second Lieutenant

Drives: '12 F10 535i
Join Date: Nov 2012
Location: Marina Del Rey, CA

iTrader: (1)

Originally Posted by Alan l. View Post
Strange. I've never heard of them in all the years i've been into modding. I'm assuming they need to remove the ecu and bench flash it.

L7AS - any before and after dynos?

Originally Posted by RambleJ View Post
I might be heading back to Cali in the next month and might give this a try.
Did you get a before and after dyno?
Hey guys, I did not have before and after dynos. I was quite busy back then. I was going to get one few days ago, but I decided to change to JB4 Stage 2. My brother just got a 640i GC, and I decided to give the ETG tune to him (Jags Gill himself reprogrammed the box for the F07), and get the JB4 stage 2.
Also, we can adjust the boost in the ETG tune by using flathead screwdriver. Default is set at "6", but if you ever fill the car with race gas, try and set it to "7". It should increase the gain by 4%.

Alan - the ECU was not removed. it was the same PnP tune.

Some differences I notice between them:
- ETG pushes the car harder on higher RPMs (around 4+), whereas the JB4 has more power on lower RPMs.
- In terms of lag, the JB4 has lesser.

I would try to get dynos on my brother's car (ETG) and mine (JB4 S2), and post them.
Not anytime soon though.

Originally Posted by Diplomatic View Post
Woot2! that's mine!