Quote:
Originally Posted by Teddylongtooth
Hey bro, I wanted to chime and let you know that yes you can fill the crack with epoxy resin made for carbon fiber. You will need to remove the lip and secure it to something so its stays flat while you fill the crack with epoxy and then sand and polish it. You need to use many different grits of sand paper probably starting off with 400grit and moving up to 3000grit, tape off the area around the crack so your not creating more scratches than you need too. Sand with light pressure and constantly check your sanding so you don't sand off too much. once you get the crack sanded and smoothed out you can use a 3m headight lens restoration kit to polish it up. There a few YouTube videos on carbon fiber crack repair to help you get a better understanding of how this is done. Ive done it many times and it's worth trying before buying a new lip.
Good luck
|
Thank you so much!!! This is the info I was looking for