Please have a look at my problem above. Been stuck for over a year now.
Quote:
Originally Posted by M_Bimmer
This is an old post, but just incase others are interested.
Almost everything OP posted is expected when dealing with seat modules.
Going back to 1st post, I'd ask for the real codes being thrown by the seat module. If past that point, then I'd recommend recoding the original module......
When you get used modules, it must have the same I-STEP, else you will have issues and and F01 vs F10 do not have the same I-STEP...and when trying to VO code, you may achieve partial success. Also, original seat modules from the factory are numerous and widely varied on what electronics are populated on the circuit card. Realoem doesn't always have all part numbers that are interchangeable, and the new units you can buy, are limited on variations to reduce supply chain burden on BMW.
BTW, depending on F10, year and options, the seat sensor that supports the SRS system are different...and there are two variants and they are not interchangeable, w/o changing out the seat sensor. This will set the seat SRS dash light.
|