Quote:
Originally Posted by automaz_
You may need more washers in between i for some reason needed 6mm of washers but that should be easy just go to local auto store and get a bag of washers and try them out until good
|
Agreed. For me the 4mm Case washer was BARELY thick enough; even with the pistons fully pressed into the calipers the outside pad was a tight fit. A 5-6mm thick washer would have done better for me to properly center the caliper over the rotor.
I do end up with a couple mm more wheel spoke clearance, though, so there’s that.
Your calipers look great!!! They really pop behind those black wheels.