Errors after attempting to write FA
While I was attempting to add enhanced bluetooth. I seem to have gotten ahead of myself and caused several errors. I now have a take to BMW service to correct Instrument Cluster failure. I also have errors with headlight aiming, low tire pressure and traction control. I got the following when I tried to code back to original state:
Transaktions-Report: Aktion: Codieren
CMB_MEDIA [36]
cdDeploy Finished
cafd_000005b6-004_002_017 Finished
ACSM [1]
cdDeploy Finished
cafd_0000009c-005_001_001 Finished
cafd_000008e5-005_001_006 Finished
cafd_000008e8-005_003_007 Finished
GWS [5e]
cdDeploy Finished
cafd_000000d0-003_004_004 Finished
ZBE [67]
cdDeploy Finished
cafd_0000007e-002_003_004 Finished
HU_CHAMP [63]
cdDeploy Finished
cafd_000000f9-007_001_105 Finished
KOMBI [60]
cdDeploy FinishedWithError
cafd_00000069-009_001_006 FinishedWithError
EKPM [17]
cdDeploy Finished
cafd_00000098-000_008_111 Finished
JBBF [0]
cdDeploy Finished
cafd_00000014-004_110_090 Finished
EMF [2a]
cdDeploy Finished
cafd_0000029b-000_009_006 Finished
PDC [64]
cdDeploy Finished
cafd_00000018-004_010_006 Finished
HKFM [d]
cdDeploy Finished
cafd_000007c8-007_001_022 Finished
DME [12]
cdDeploy FinishedWithError
cafd_00000721-003_006_000 NotExecutable
EGS [18]
cdDeploy Finished
cafd_0000023f-016_016_035 Finished
EHC1 [38]
cdDeploy Finished
cafd_000000f5-004_008_007 Finished
FRM [72]
cdDeploy Finished
cafd_0000012f-012_006_023 Finished
FZD [56]
cdDeploy Finished
cafd_00000552-001_032_000 Finished
cafd_00000553-001_045_001 Finished
IHKA [78]
cdDeploy Finished
cafd_00000092-004_002_110 Finished
CAS [40]
cdDeploy Finished
cafd_0000000f-005_025_058 Finished
ICM_QL [1c]
cdDeploy Finished
cafd_00000052-007_010_000 Finished
DSC [29]
cdDeploy Finished
cafd_000000d8-005_250_036 Finished
EPS [30]
cdDeploy Finished
cafd_000002c9-002_002_000 Finished
SZL_LWS [2]
cdDeploy Finished
cafd_0000033d-001_009_002 Finished
CMB_ECALL [61]
cdDeploy Finished
cafd_000005b7-004_001_004 Finished
I also have to reset the clock and date and it says I need a service since 1/2005. What did I do wrong to get so many errors? I have tried resetting by coding back in the original FA codes, but still get the errors above. Any ideas would be greatly appreciated.
I have an F11 528i 2011.
|