[$howtime456]

you will need an EOS EKPM. Above e40 you will burn out your stock ekpm3 and will leave you stranded. I have used full e85 with and without port injection. With Spool FX150 you will get around 18psi before you start starving for fuel.On FX180 your lucky if you hit 21psi. With port you i have hit 26psi on 750cc injectors. All this is done on a single 525 lpfp. STFT were steady. My new setup now i am running 2 525lp with a Motive Reflex to monitor fuel pressure. Thegood thing about EOS EKPM is that you can control 2 pumps! I have also upgraded my injectors to ID 1050x to leave a little bit more wiggle room.