Quote:
Originally Posted by remmib
No rubbing issues, but it's not really flush. OEM 8.5" wide wheels are ET33, so only 2mm more inwards.
|
I not sure that's correct. (Or is there a 19x8.5 ET33 square set up that's stock?)
I believe the current 351M rears are 19x9 et44. So it's 9mm out (et44-et35) - 6.35mm (1/2" narrower wheel) + additional 5mm tire width (255). I guess that would be a net ~7mm additional poke on the rears? Or just 3mm on the wheel?
And if I use a 20x9 et35 (Niche M185) that would be 9mm out + 0mm (same width as 351M rear) + 5mm additional tire width (255) = 14mm net poke? Not sure if this will rub inside the rear fender?