Quote:
Originally Posted by Luky
I not sure that's correct. (Or is there a 19x8.5 ET33 square set up that's stock?)
I believe the current 351M rears are 19x9 et44. So it's 9mm out (et44-et35) - 6.35mm (1/2" narrower wheel) + additional 5mm tire width (255). I guess that would be a net ~7mm additional poke on the rears? Or just 3mm on the wheel?
And if I use a 20x9 et35 (Niche M185) that would be 9mm out + 0mm (same width as 351M rear) + 5mm additional tire width (255) = 14mm net poke? Not sure if this will rub inside the rear fender?
|
Non-staggered OEM setup with 351M on MSport, as remmib stated, is indeed 19 x 8.5 ET 33 all around. Your proposed ET 35 setup for an 8.5" wheel is nearly identical to OEM. These will not be flush. I am running 19 x 9.5 ET 35 on my rear wheels (with 275/19/35 tires) and they are closer to a flush setup.
__________________
2013 535xi, Carbon Black, beige interior, M Sport package, HUD, DDC & ARS, ACS springs, Kelleners wheels
2010 Z4 35i, Crimson Red, beige interior, 6sp manual, Adapative Suspension
2000 528i, Cosmo Black, beige interior, Sport package (retired)