so... it looks like my MGU doesn't fit for night vision.
KIS Calculation shows me, that i have to replace the hardware.
It looks like i have this installed:
00005F32 LU MGU High 1.0 DIN B314__0073
(CPU high, 6GB RAM, 32GB eMMC, HDD, WLAN, USB2, USB3, OABR 4Port) MGU
there is also another MGU hardware with 5 OABR Ports and with or without CVBS, GPS or DVD Port.
in the diagram a FBAS connection is required to the headunit to Pin 7, 13 and 14... so the CVBS Port on the MGU is missing.
so whats next? replacement of the whole MGU? Or is their a way to enable the CVBS Port on the current MGU?
Code:
MAIN:
1 KL30_B
2 KL31
3 KL30_F
4 n.c.
5 UART_KON_RX
6 GND
7 CVBS_IN1_P
8 n.c.
9 CAN_H
10 n.c.
11 WAKE_UP
12 UART_KON_TX
13 GND
14 CVBS_IN1_N
15 n.c.
16 CAN_L
OABR:
1 OABR-BDC -
2 OABR-ATM -
3 OABR-BDC +
4 OABR-ATM +
5 n.c.
6 n.c.
7 Shield
8 Shield
9 n.c.
10 n.c.
11 OABR-RSE +
12 OABR-KOMBI +
13 OABR-RSE -
14 OABR-KOMBI -
15 n.c.
16 n.c.
17 OABR-RAM +
18 n.c.
19 OABR-RAM -
20 n.c.