Situation:
Customer Care Package was performed at 40K; car now has 60K. Took the car in to the dealer to diagnose misfires; bank 1 injectors found faulty/leaking. Injectors tested OK at 40K, dealer would not re-perform CCP w/o BMW NA approval. Opened case w/ BMW who offered to defray half the cost (dealer quote $24xx.xx) so I've decided to attempt.
I've been told there are several types of injectors and compatibility is key. I searched and found nothing definitive - anyone have any links/guides? Not sure if the code is based on the part number etc.
I could not find a guide on how to remove/install the injectors but there are copies of the BMW tool out there, examples below. Leaning towards first option.
BMW tool equivalent 0 496 885
http://www.amazon.com/Koch-Tools-KT2.../dp/B01N9SEWPO
Rental of above
http://www.specialtyautotoolrentals....roducts_id=273
http://www.amazon.com/FUEL-INJECTOR-.../dp/B0195QEMS0
"Application: BMW N63 (After Sep,2012) engine" - my car is 3/11 date so this may not work
Not sure about this...very basic
http://www.amazon.com/Fuel-Injector-.../dp/B015QGHZR8
Hoping someone has access to procedural guide. Assuming fuel pressure has to be relieved etc. Have access to an Autologic in case programming/initialization is needed.
Thanks everyone,
-Wes
'11 550i 6spd
'02 M5
'00 M5 (RIP)