For the first time I removed the engine shield and found this
Not a good look.
To remove the engine mount the engine mount arm needs to be removed and the DPF has to be taken off. I did not feel like removing the DPF as it is a PIA to put pack together so I dropped the subframe about 1 inch and the mount came off.
BBQ sauce substance leaked out and also collapsed to the point that it was metal on metal.
I ordered LEFT and RIGHT engine mounts per realoem part numbers. but comparing the parts they all look exactly the same.
I am not sure if they are the exact same part or if it was a mistake.
My car creeper is a goner. Researching what is a good one to buy.