Quote:
Originally Posted by Bonawitz07
This isn't specific to using ISTA but this thread may help you. For some it took a few tries (up to 5-6 attempts) resetting the life within the dash menu, one person noted driving the vehicle, parking it without the parking brake on and then resetting which worked, and some have mentioned that the new sensor they purchased was bad (although I doubt that's your case since you bought OEM).
https://f10.5post.com/forums/showthread.php?t=634891 |
It's ironic that as advanced as the technology has become, there still seems to be many instances of where things are corrected by going through the same procedure, over and over!
I've tried it several times now. I am about to try and reset in ISTA while the sensor is unplugged, and then plug in again.
It's strange that I can't seem to locate the menu selection that shows percentage available.
I've read that some have read this value as 255%, and that "resetting" the value to 100% remedied the "reset impossible" condition, which is what I am getting.
Thanks for the input.
Hopefully someone can also direct me to the data points in ISTA+!