[OnlyGerman]

Ok so installed the Dinan sport tuner few weeks back with no issues. Car was in the shop for some work and had them update it for the trans. This supposedly updated the entire car. On pick up the CEL was on, scanned and came back with "Boost pressure sensor, plausibility caster: pressure too high", reset it and drove home. Came back. I unplugged the Dinan tuner, reset code, drove around with multiple on/off and no longer appears. Rechecked with bimmerlink, all good.

Is it really possible that the car update done by ista with now throw code when the dinan tuner is connected?