Pics of Install
Bump to top to show install pics. I will document everything and post here. There is a considerable amount of prep work to make sure you have all the right parts ready. You will need M5 Brake lines front and back, Rear M5 Brake line clilps, Front Rotor Bolts to hold to axle, have a dremel ready to cut the brake dust protectors, have a 9 MM HEX socket ready as most sets only have a 8mm and 10 mm in them, and a few other little tips and tricks. Also highly recommend a pressurized bleeding system so one person can bleed brakes.
Last edited by mikekilpatrick; 09-06-2018 at 02:18 AM..
|