Quote:
Originally Posted by Noelmus
Hi, I would like to know if I can separate that chrome circled in yellow from the remaining trim(see image), so that I will wrap the remaining part only of the trim. In other words I don't want to wrap the chrome part. You have front and back of the trim in the image.
Thanks in advance
|
Hey,
Noelmus, I recently wanted to do the same thing to my F10. As I wanted to maintain the chrome accent untouched; for contrast.
- Cleaned thoroughly with IPA.
- Taped and covered the chrome area(s) with painter's tape; right up to the crease.
- Wrapped with ViVvid 3D Carbon Fiber.
- Cut right on the creased areas (protected by the painter's tape; as to not scratch the chrome surfaces.
- Re-installed and enjoyed.
Pics Attached.