[Anwar1995]

Hello everyone,

Today my brother was driving my 535i F10 LCI when the following message appeared on the instrument cluster:

Engine Oil Pressure: Stop Carefully! (In red)

we scanned the car using my BM700 scanner and it showed the following codes in the ECM:

1C3002 Engine-oil pressure sensor, electrical: short circuit to earth
118002 Mixture control: Fuel-air mixture too rich
1C3101 Engine oil pressure sensor, plausibility: pressure too high before engine start
1C0102 Oil pressure control, plausibility, static: pressure too low
1FB801 Check Control message (ID212): Engine oil pressure! Stop the vehicle carefully
1C0301 Oil pressure control valve: stuck in fully energised position (minimum oil pressure)
1C2002 Engine oil pump: Pressure too low
1C3102 Engine-oil pressure sensor, plausibility: pressure too low before engine start

Now for me it seems like the oil-pressure sensor gave out as the message popped instantly implying the oil pressure is critically low. in other threads I notice that some got a yellow notification saying the the engine oil pressure is getting low but not implying to stop immediately.

also the contradicting 2 errors of pressure too low then pressure too high before engine starts maybe also indicating that the sensor is gone?

If anyone read through this kindly give me your valuable opinion. many thanks!