Quote:
Originally Posted by NinetyEight740
Engine mounts you need a means of being able to support the engine while lowering subframe, if you don’t have a way to do this is may be too costly to buy the tools.
Rear diff bushing you will need to drop your exhaust and lower the differential. There is a very specific tool to remove and install the bushing. Again, if you don’t have the necessary tools it isn’t worth purchasing do use once
|
I've done engine mounts by raising the engine. I supported the oil pan with a large piece of wood and was able to raise the engine the couple of inches needed to replace the hydraulic mount. I don't know if this will work on a BMW.