Quote:
Originally Posted by SoCal550
Very nice job on the DP. Can you elaborate on the parts you bought for the quad exhaust ? Any more pics from underneath ?
|
I bought the tips off of Ebay 2.5" to quad 4" I believe. The tips on ebay were 80 for the pair. And the other 80 dollars was spent on stainless 2.5" tube. 2 pieces that had 45 degree bends and 2 pieces that had 90 degree bends. I don't have pictures of the underneath at the moment but I can take some pictures tomorrow.
I tig welded the tips and the small length of tube to the 2 longer pieces with the 45 degree bends and just mig welded those to the stock tubes on the car where I cut the mufflers off at. I really wanted to tig weld some v bands at that junction. Just ran out of time as I had plans. So I might go back and cut the 45s with the tips at the stock junction and weld 2 v band assemblies at that point.