How to fix oil leaking on valve cover from vent pipe

hawkjr1 · 05-03-2020, 07:03 PM

I replaced the valve cover on my 2013 535i and things turned out good. I had no more oil leaking on the cat. The other day I check I noticed that there is oil, (very small amount) leaking where the vent tube connect from the black plastic down pipe to the valve cover. This is the very first tube from the front. When I replace the valve cover I also replaced the vent tube. There is a ¼ or 1/8 gap when I connect the vent pipe to the valve cover. I tried just about everything to close that gap but it wouldn’t go any further. The little clips are all in place and appear to be locked in place. Anyone dealt with this problem and what is the trick to getting it on to stop the leak.

95blkmax · 05-03-2020, 08:00 PM

That's odd. It should just pull in all the way until the 4 prongs clip in. My first thought would be, did you use BMW parts for this or aftermarket ones? or 1 component is BMW and the other is aftermarket?

Jalumi69 · 05-04-2020, 12:59 PM

There should be a green rubber seal - Are you missing it? maybe

05-03-2020, 07:03 PM	#1
hawkjr1 Retired US Army/Police Officer 38 Rep 162 Posts Drives: F10 M-Sport, E-92 Join Date: Sep 2015 Location: Augusta, Ga iTrader: (0) Garage List 2017 Silverado [0.00] 2013 BMW 328i Coupe [0.00] 2013 535i M Sport [0.00]	How to fix oil leaking on valve cover from vent pipe I replaced the valve cover on my 2013 535i and things turned out good. I had no more oil leaking on the cat. The other day I check I noticed that there is oil, (very small amount) leaking where the vent tube connect from the black plastic down pipe to the valve cover. This is the very first tube from the front. When I replace the valve cover I also replaced the vent tube. There is a ¼ or 1/8 gap when I connect the vent pipe to the valve cover. I tried just about everything to close that gap but it wouldn’t go any further. The little clips are all in place and appear to be locked in place. Anyone dealt with this problem and what is the trick to getting it on to stop the leak. __________________ 318IS-330IC-E90-E92 328i F10 535i M
	Appreciate 0 Tweet Quote

05-03-2020, 08:00 PM	#2
95blkmax Captain 251 Rep 705 Posts Drives: '11 535 M-Sport Join Date: Nov 2019 Location: Oklahoma City iTrader: (0)	That's odd. It should just pull in all the way until the 4 prongs clip in. My first thought would be, did you use BMW parts for this or aftermarket ones? or 1 component is BMW and the other is aftermarket? __________________ I'm on the YouTubez now!! Check it out -> https://www.youtube.com/@turbospool 2011 F10 Shuenk N55+ Turbo'd is SOLD. Now building a 2018 Golf R on E85!
	Appreciate 0 Quote

05-04-2020, 12:59 PM	#3
Jalumi69 Private 20 Rep 55 Posts Drives: 528i Join Date: Oct 2018 Location: Atlanta iTrader: (0)	There should be a green rubber seal - Are you missing it? maybe
	Appreciate 0 Quote