|
|
04-14-2015, 12:28 PM | #68 |
Colonel
471
Rep 2,416
Posts |
Bringing this from the dead. due to the lack of knowledge with the few shops i delt with i had a meth kit that never worked and i took it off.
The problem was that they did not connect the power to the correct place and meth would flood my engine any time i would open my car. I now know the correct place it has to connect to the fuse inside the box that by the windshield of passenger where people usually lay down their BMS box. I will re install meth with in next few weeks and do proper testing.
__________________
2011 550i RWD 60-130 7.35
|
Appreciate
0
|
04-20-2015, 09:12 AM | #69 |
Registered
0
Rep 3
Posts |
badblack550xi
Let me know how you make out with the meth install? I am interested not only for performance, but also to help maintain clean intake valves. Thanks! |
Appreciate
0
|
04-21-2015, 12:06 PM | #70 |
Colonel
471
Rep 2,416
Posts |
Will do i have not had time yet as i am busy with the intakes but will start making CAD file for the Meth Charge pipes this week.
__________________
2011 550i RWD 60-130 7.35
|
Appreciate
0
|
05-01-2015, 12:56 PM | #71 |
Registered
0
Rep 3
Posts |
Thanks!
I have a 740i with the n63 motor. I am probably going to start running some liquid tubing and multi-conductor electrical cables this weekend to get some of that work out of the way. What resevoir did you end up going with? I am going to find some dims for this one as it appears that it may fit perfectly in the empty space by my battery. http://www.amazon.com/AEM-Water-Meth.../dp/B0058KGTFC The charge pipes you are referring to - are they still going to be before the inter-coolers? |
Appreciate
0
|
05-01-2015, 02:15 PM | #72 |
Captain
455
Rep 844
Posts |
I may do a kit with summer coming up... the way I install my kits is much sneakier though
Or drive out to AZ, I will fab you up some bad ass charge pipes with stainless and install your kit for you. |
Appreciate
0
|
05-01-2015, 02:38 PM | #73 |
Colonel
471
Rep 2,416
Posts |
might have to drive out to you =D
__________________
2011 550i RWD 60-130 7.35
|
Appreciate
0
|
05-04-2015, 09:04 AM | #74 |
Registered
0
Rep 3
Posts |
Hey badblack550xi,
Do you know the sizes for the inter-cooler to turbo hoses? I am looking to make up a set for my meth kit as I do not want to put a hole in the OEM since I am still under CPO. Thanks! |
Appreciate
0
|
05-04-2015, 12:00 PM | #75 |
Colonel
471
Rep 2,416
Posts |
Not yet man... i cut my OEM and now i have to buy a new set they are $300 a pop. I will be getting a custom one made very soon.
__________________
2011 550i RWD 60-130 7.35
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|