|
|
|
2010 2011 BMW 5 Series Forum F10 Non M-Sport 3D Design Front Lip Install help |
|
Post Reply |
|
Thread Tools | Search this Thread |
08-13-2017, 04:13 PM | #1 |
Private First Class
66
Rep 193
Posts |
Non M-Sport 3D Design Front Lip Install help
Hey guys. I have a 3D design front lip for a non m sport bumper which I bought from a forum member. I was hoping someone might be able to guide me on how to install this. I have a '16 528i Non-M. Any help is appreciated.
Thanks everyone! |
08-13-2017, 10:13 PM | #2 |
Lieutenant General
9191
Rep 14,521
Posts |
did mine a few years back but because i had a PU splitter to install with the 3d carbon spoiler i decided taking the front bumper off was ideal
here i have the bumper off the 3d spoiler basically fits over the lower part of your front bumper like so i couldn't find the pictures i posted from where i installed the double sided tape but you'll see that you'll place some 3m tape across the spoiler where it overlaps the OEM lip by the fog lamp cover and you'll lay several pieces across all the way back to the other fog lamp cover. also, i used self tappers across underneath the bottom for added security. it's not very hard to do
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
1
saad260565.50 |
08-14-2017, 12:28 AM | #3 |
Brigadier General
5719
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
I know its not the exact same but this is what I did for my front lip. I used double sided tape and then used 4 self tapping screws to keep the bumper in place
Red: Screws Blue: Tape |
Appreciate
2
saad260565.50 lsturbointeg9191.00 |
08-14-2017, 08:51 AM | #4 |
Lieutenant General
9191
Rep 14,521
Posts |
There you go! I had a picture like Ick did with the red/blue. But i continued the blue (tape) across the bottom in the middle
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
08-14-2017, 09:25 AM | #5 | ||
Private First Class
66
Rep 193
Posts |
Quote:
Quote:
|
||
Appreciate
2
Ickdeep5719.00 lsturbointeg9191.00 |
08-14-2017, 10:39 AM | #6 |
Lieutenant General
9191
Rep 14,521
Posts |
The middle grill can stay on. The foglight grill and the fogs themselves are removed if you're removing the front bumper. You could actually do it without removing the bumper but i had to because of the splitter i was adding
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
1
saad260565.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|