|
|
07-25-2014, 04:01 PM | #1 |
Second Lieutenant
32
Rep 258
Posts |
TPMS problem
Hey guys...have a new set of custom wheels/tires a few months old that had new set of TPMS in them, and worked fine with my 535.
Just got a 550 and transferred those onto it, and got a TPMS malfuntion message. Says something along the line that the signals are not being received and could be interference. So the TPMS was working fine on the stock wheels a few minutes beforehand, and the TPMS on this particular set of wheels was working fine when they were recently on the 535, it seems like either something happened when I changed tires, or there is some initialization step I am missing. I already tried the normal reset function of the TPMS in the Vehicle Info section. Tried resetting numerous times with no luck. Any ideas? Thanks, |
Post Reply |
Bookmarks |
|
|