lsturbointeg's "Black Candy" build thread! (with daily/weekly updates!)

lsturbointeg · 04-07-2020, 12:21 AM

onto my next project to do list!

painted the cross bars inside the grill with Rustoleum's Metallic Champagne Bronze!

while i was at it i thought it would look nice to have the strut braces compliment it

i took it a step further and painted my strut bar as well

lsturbointeg · 04-07-2020, 11:14 PM

so i sprayed 3 coats of matte clear on the strut, cross bars and decided to start working on the VRSF cp install while they were drying!

good reason why i ordered an oil catch can!

side by side comparison

so i ran into an issue with the cp connecting to the throttle body. seems like the bore inside the inner lip is too small? contacting the seller and will post you guys on updates

ey2001 · 04-08-2020, 02:27 PM

Quote:

Originally Posted by lsturbointeg

so i sprayed 3 coats of matte clear on the strut, cross bars and decided to start working on the VRSF cp install while they were drying!

good reason why i ordered an oil catch can!

side by side comparison

so i ran into an issue with the cp connecting to the throttle body. seems like the bore inside the inner lip is too small? contacting the seller and will post you guys on updates

Your saying thats the max it will go in? Did you try without the rubber gasket to see if it fits?

ey2001 · 04-08-2020, 02:40 PM

I was able to fit it when I lubed the o ring very lightly

lsturbointeg · 04-08-2020, 08:29 PM

Quote:

Originally Posted by ey2001

I was able to fit it when I lubed the o ring very lightly

Thanks for the pointers bud! I was able to get it on

ey2001 · 04-08-2020, 08:32 PM

Quote:

Originally Posted by lsturbointeg

Quote:

Originally Posted by ey2001

I was able to fit it when I lubed the o ring very lightly

Thanks for the pointers bud! I was able to get it on

I check my invoice from xph... I purchased it may 2018... and I put it on today... 😂 thanks for the motivation...

lsturbointeg · 04-08-2020, 08:33 PM

Quote:

Originally Posted by ey2001

I check my invoice from xph... I purchased it may 2018... and I put it on today... 😂 thanks for the motivation...

Lol get that on already!

ey2001 · 04-08-2020, 08:36 PM

Quote:

Originally Posted by lsturbointeg

Quote:

Originally Posted by ey2001

I check my invoice from xph... I purchased it may 2018... and I put it on today... 😂 thanks for the motivation...

Lol get that on already!

Yea I put it on earlier... when I got my Wagner ic I threw it on that night... but the charge pipe wasn't that important because I had it in the garage for back up...

lsturbointeg · 04-08-2020, 08:38 PM

Quote:

Originally Posted by ey2001

Yea I put it on earlier... when I got my Wagner ic I threw it on that night... but the charge pipe wasn't that important because I had it in the garage for back up...

Cool. I'm looking into the intercooler now for the next upgrade

lsturbointeg · 04-10-2020, 07:47 AM

Got the car somewhat completed and back on the ground. Here's an audio clip of a cold start and revs. You can also hear the TurboSmart dual port bov in the background. This thing is so much louder now and I love the new tone of the exhaust.

Here's the TurboSmart

DRKNEVL · 04-10-2020, 01:59 PM

Sounds awesome!

lsturbointeg · 04-11-2020, 07:42 AM

here's some shots of the VRSF cp installed. like i said, couldn't get it to slide up over the throttle body but after stepping back and re accessing what i was doing wrong i was eventually able to get it on and get the c clip to snap in place

lsturbointeg · 04-11-2020, 07:42 AM

strut brace, strut supports and cross bars installed! i really liked the way these turned out.

lsturbointeg · 04-11-2020, 07:49 AM

Dtex535 · 04-11-2020, 10:55 AM

Quote:

Originally Posted by lsturbointeg

Looks good. Just sold my 356’s. You should throw some spacers on with them. I had 10mm up front and 15mm in the rear. Gave it a way better stance.

lsturbointeg · 04-11-2020, 01:42 PM

Quote:

Originally Posted by Dtex535

Looks good. Just sold my 356’s. You should throw some spacers on with them. I had 10mm up front and 15mm in the rear. Gave it a way better stance.

eventually but these are just on for the time being until i get my new tires for my AG's

lsturbointeg · 04-12-2020, 06:50 AM

lsturbointeg · 04-12-2020, 06:51 AM

lsturbointeg · 04-12-2020, 06:57 AM

Quote:

Originally Posted by Dtex535

Looks good. Just sold my 356’s. You should throw some spacers on with them. I had 10mm up front and 15mm in the rear. Gave it a way better stance.

BTW, do you have pictures with those spacers? wanna see how flush they look

Dtex535 · 04-12-2020, 10:14 AM

Quote:

Originally Posted by lsturbointeg

BTW, do you have pictures with those spacers? wanna see how flush they look

lsturbointeg · 04-12-2020, 10:18 AM

Quote:

Originally Posted by Dtex535

looks amazing bro thanks!

lsturbointeg · 04-14-2020, 08:53 AM

CQUENCEBRAKES came in! complete with POSI QUIET front/rear pad and brake sensors

04-07-2020, 12:21 AM	#309
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	onto my next project to do list! painted the cross bars inside the grill with Rustoleum's Metallic Champagne Bronze! while i was at it i thought it would look nice to have the strut braces compliment it i took it a step further and painted my strut bar as well __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 ezaircon4jc5322.00 Quote

04-07-2020, 11:14 PM	#310
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	so i sprayed 3 coats of matte clear on the strut, cross bars and decided to start working on the VRSF cp install while they were drying! good reason why i ordered an oil catch can! side by side comparison so i ran into an issue with the cp connecting to the throttle body. seems like the bore inside the inner lip is too small? contacting the seller and will post you guys on updates __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

04-08-2020, 02:40 PM	#312
ey2001 Captain 310 Rep 717 Posts Drives: F10 535i 6spd Join Date: Apr 2007 Location: la iTrader: (0)	I was able to fit it when I lubed the o ring very lightly Attached Images
	Appreciate 3 ezaircon4jc5322.00 lsturbointeg9195.00 F10N557.00 Quote

04-10-2020, 07:47 AM	#318
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	Got the car somewhat completed and back on the ground. Here's an audio clip of a cold start and revs. You can also hear the TurboSmart dual port bov in the background. This thing is so much louder now and I love the new tone of the exhaust. Here's the TurboSmart __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 3 jayster0966209.00 ezaircon4jc5322.00 bigscore70.00 Quote

04-10-2020, 01:59 PM	#319
DRKNEVL Second Lieutenant 217 Rep 219 Posts Drives: 2015 535i M Sport, 2015 X5 35i Join Date: Aug 2009 Location: Orange County CA iTrader: (0)	Sounds awesome!
	Appreciate 1 lsturbointeg9195.00 Quote

04-11-2020, 07:42 AM	#320
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	here's some shots of the VRSF cp installed. like i said, couldn't get it to slide up over the throttle body but after stepping back and re accessing what i was doing wrong i was eventually able to get it on and get the c clip to snap in place __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 ezaircon4jc5322.00 Quote

04-11-2020, 07:42 AM	#321
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	strut brace, strut supports and cross bars installed! i really liked the way these turned out. __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 2 cdmulders348.50 ezaircon4jc5322.00 Quote

04-11-2020, 07:49 AM	#322
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	__________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 ezaircon4jc5322.00 Quote

04-12-2020, 06:50 AM	#325
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	__________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 ezaircon4jc5322.00 Quote

04-12-2020, 06:51 AM	#326
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	__________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 1 ezaircon4jc5322.00 Quote

04-14-2020, 08:53 AM	#330
lsturbointeg Lieutenant General 9195 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	CQUENCEBRAKES came in! complete with POSI QUIET front/rear pad and brake sensors __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 4 Ickdeep5722.50 jayster0966209.00 ezaircon4jc5322.00 ey2001310.00 Quote