|
|
|
2010 2011 BMW 5 Series Forum F10 Retrofit help - 2016 Lci folding mirrors |
|
Post Reply |
|
Thread Tools | Search this Thread |
08-12-2019, 01:26 PM | #1 |
Enlisted Member
5
Rep 41
Posts |
Retrofit help - 2016 Lci folding mirrors
Hi all
I have got a 2016 F10 which I am trying to install folding mirrors, I have got a set of folding mirrors and drivers door switch. I have seen a guide for pre-lci doing the soldering trick I was wondering if that same method shall work with the lci mirrors and shall the indicators still work ? Thanks for you help |
08-15-2019, 03:22 PM | #2 |
Registered
2
Rep 2
Posts |
Hello,
When i did my 2014 LCI the switch was slightly different and didn't have the same pins where they can be soldered together. Instead i soldered and crimped together the wires going to the same pins. You need E-Sys to add the correct VO / code the car for the indicators, heated mirrors and auto-dipping to work Last edited by IINexusII; 08-15-2019 at 03:26 PM.. Reason: picture of wires |
Appreciate
1
harmz5.00 |
08-21-2019, 02:24 AM | #3 | |
Enlisted Member
5
Rep 41
Posts |
Quote:
I with the mirrors i am installing i am also planning to do the surround view install long side that, which i am assuming has no impact on the install of the folding mirrors apart from running the HSD cables, thanks for your help |
|
Appreciate
0
|
08-07-2020, 04:19 PM | #4 | |
Registered
2
Rep 2
Posts |
Quote:
As far as I remember only VO coding needed, and no changes needed to wiring on the passenger side. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|