[MegaGoo]

I was having a bad rattle at idle coming from the rear of the car. I jacked it up and found that the rear exhaust hanger had come off of the bolt on the rear differential (or subframe?).

As you can see in the picture, I placed the mount back onto the bolt but I am having trouble finding a nut that fits. A m12 started to thread maybe 1 turn but stopped. Can someone tell me exactly which type of nut I need?

It appears the bolt is part of the differential (part 7573819) but it could be the rear subframe (part 6775896)

Picture is sideways

Thanks in advance.

Edit: Solved.. it's a hex nut size m12, 1.5 thread pitch that fit

[chipguy]

realoem is your friend. you can look up the size there.

[MegaGoo]

Originally Posted by chipguy

realoem is your friend. you can look up the size there.

Before you posted this I realized there were different thread standards so I went and picked up a m12 1.5 (fine) and a 1.25 (extra fine). The 1.5 did the trick. I just looked it up via realoem and it confirmed.

07129904866
Hex nut
M12X1,5ZNNIV SI

Thank you