[Conserve]

[darkbimm3r]

Hello! Any one know how disable/decode comfort access from F11 2014 years? Any codding information. I know you can unplug all handles, but want to do clean and full decode. Thanks.

[Qsilver7]

Originally Posted by darkbimm3r

Hello! Any one know how disable/decode comfort access from F11 2014 years? Any codding information. I know you can unplug all handles, but want to do clean and full decode. Thanks.

I don’t think CA handles can be “coded” because they are physically connected electronically and communicate over a bus. Similar to soft close feature. You can’t code soft close…if you don’t want it to operate, you have to disconnect the electrical harness. Or the electric windows…if you don’t want the (front) windows to go up & down when you touch the switch, you have to disconnect the electrical harness to the switch. Probably the same for the comfort access feature…to not make it work would require disconnecting the power source.

There’s capacitive sensors built into the handle, and when those sensors are touched, the doors are either locked or unlocked.