|
|
|
2010 2011 BMW 5 Series Forum F10 coding used parts to the car. Not sure where to start |
|
Post Reply |
|
Thread Tools | Search this Thread |
04-17-2024, 08:36 AM | #1 |
Private First Class
168
Rep 116
Posts |
coding used parts to the car. Not sure where to start
I have replaced a couple parts and now when I run diagnostics on the car it shows those items not coded to the car. Main one is the shifter I swapped in and the steering column. Both say not coded to car. Also keep getting a central gateway memory error.
|
05-02-2024, 01:24 PM | #2 |
Captain
222
Rep 683
Posts |
the gateway is like the "central dispatch" of the car's modules trying to communicate. So if you have dead modules or modules that are not coded to your VIN, the gateway will treat them the same and throw errors for those modules.
Hit up Valentin at RVG Performance. He is able to remote in to your car and may be able to do it all remotely. Know that there are some modules that require bench-virginizing prior to coding to the car.... where as others can just get coded. Just depends on what all you changed. Valentin would be the one to tell you. Easiest way to reach him is through Facebook Messenger or IG chat. He'll go over all the details and pricing with you and you decide how you want to proceed.
__________________
I'm on the YouTubez now!! Check it out -> https://www.youtube.com/@turbospool
2011 F10 Shuenk N55+ Turbo'd is SOLD. Building a 2018 Golf R! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|