[chutoyy]

I hit a massive pothole the other day and some parts fell off my car, but here are some cheaper replacement parts that fit nicely.

Sourced from a Raw Tek(nical) company in Canada; BM1 535 N57 SP
Bimmertune has a suitable EGR replacement kit; EGR 535d US

Of course I had to have an exhaust kit made at a local shop because I don't know how to weld; and I had some ECU "damage" that required some programming...

The passenger ballast tank at the rear has 3 hose attachments, one going to the front of the vehicle (which was cut because the fuel tank would have to be dropped) and two to the gas flap as well as a metal strap held on by a couple nuts covered by a plastic panel.

Hope this information helps someone and beware of those potholes.

[chutoyy]

Oh yeah, ended doing a dual exit exhaust as well... I went with a simple ebay diffuser that didn't require cutting or modification like some other aggressive ones; undo a couple clips, pull it off (held on by a bunch of tabs) and literally smack the new one on.

Amazon 4" black chrome tips since they're going to turn a powdery black anyway...

Diffuser is sold out now, but it was eBay item 194259960654.

[Blue Angel]

Great info and pics!!! Got any more details on the mufflers you used and any feedback/video of how it sounds?

Which company in Canada? I’m in Ontario and might look them up.

[chutoyy]

Resonator came with the kit from Raw Tek (They're around Montreal?)

No videos, but I ran it straight piped to the exhaust shop and it's not terrible; didn't notice much drone, but it does make a lot of diesel wooshy noises.

Resonator removed some of lower frequency noise, but still noticeable when you get on the accelerator.

Originally Posted by Blue Angel

Great info and pics!!! Got any more details on the mufflers you used and any feedback/video of how it sounds?

Which company in Canada? I’m in Ontario and might look them up.