|
|
|
2010 2011 BMW 5 Series Forum F10 Adaptive LED Replacement TMS coding |
|
Post Reply |
|
Thread Tools | Search this Thread |
06-25-2022, 12:40 AM | #1 |
New Member
2
Rep 28
Posts |
Adaptive LED Replacement TMS coding
Hi team
Have had the issue with water in the passenger light (any tips on finding the ingress spot) Have replaced the TMS after got a stack of warnings. Now all but the low/high beam work. and have a adaptive headlight error. TMS 41 and 42 showed on esys, but had to update my esys after the pszd files were too new. After updating now on 42 shows, however this is the replacement I think as esys shows this as a replaced ECU. Done the read FA, activate, read swt, detect CAF, chose the.last on the list and coded. This coded fine, however on ISTA there is no communication from STML, and therefore I am unable to complete the run in procedure Would love some advise. Could it be a faulty TMS, or maybe one of the modules wasn't plugged in correctly? as I changed the housing for another used unit. (replacement now shows condensat too ) |
06-30-2022, 05:29 AM | #3 |
New Member
2
Rep 28
Posts |
|
Appreciate
0
|
05-15-2024, 06:16 AM | #5 | |
Registered
0
Rep 4
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|