New wheels fitment issue | Work Gnosis HR-1 20"

Akshinbekirov · 08-18-2024, 05:32 PM

Hi everyone!

I've got f10 530i 2011, i bought set of wheels, and absolutely enjoying the look of the car despite rear wheels sitting out of fenders, i was assuming that after installing coilovers and lowering it fitment will be OK.

I installed KW V3 coilovers, slightly lowered the car and wheels definitely wont go under fender... looking for advises, i really dont want to change the rims.

I want to try smaller tires and negative camber, some people say if go below 275 in backi will have issues with speed reading and gearbox (not sure why). Negative camber only on back will look ugly i think.

Wheels:

Work Gnosis HR-1

20"
9j et18
10j et18

Tires:
245/40/20
275/35/20

Im attaching the pictures for better understanding.

brad850csi · 08-19-2024, 02:52 AM

The offset at the rear is simply too low. I'm running 285mm tyres on 9.5" wheels with a 32mm offset and they fit pretty well.

DementedF10 · 08-19-2024, 07:49 AM

Yeah that offset is never going to allow what you are wanting. Im running 20x9 +32 with 255/35/20 up front and 20x10.5 +42 with 295/30/20. So you are pushed out 14mm more than mine. Thats a good bit

zener · 08-19-2024, 02:40 PM

This mine with 9,5" et22, with 245/35r20 continental. It just fits and tire doesn't rub to inner fender and my finger fits between wheel arch and wheel.
My current summer setup is 275/30r20 triangle and 10" et29 and it is also close call.

10" et18 is not gonna fit even with strech, because wheel will most likely hit wheel arch.

08-18-2024, 05:32 PM	#1
Akshinbekirov Registered 0 Rep 1 Posts Drives: BMW 530 Join Date: Aug 2024 Location: Doha, Qatar iTrader: (0)	New wheels fitment issue \| Work Gnosis HR-1 20" Hi everyone! I've got f10 530i 2011, i bought set of wheels, and absolutely enjoying the look of the car despite rear wheels sitting out of fenders, i was assuming that after installing coilovers and lowering it fitment will be OK. I installed KW V3 coilovers, slightly lowered the car and wheels definitely wont go under fender... looking for advises, i really dont want to change the rims. I want to try smaller tires and negative camber, some people say if go below 275 in backi will have issues with speed reading and gearbox (not sure why). Negative camber only on back will look ugly i think. Wheels: Work Gnosis HR-1 20" 9j et18 10j et18 Tires: 245/40/20 275/35/20 Im attaching the pictures for better understanding. Attached Images
	Appreciate 0 Tweet Quote

08-19-2024, 02:52 AM	#2
brad850csi Colonel 1327 Rep 2,357 Posts Drives: 16 F13 M6 Comp Join Date: Jan 2015 Location: Auckland, New Zealand iTrader: (0)	The offset at the rear is simply too low. I'm running 285mm tyres on 9.5" wheels with a 32mm offset and they fit pretty well. __________________ SCOTT26 "So as an admirer of the M5 and a potential customer of an M5 Touring. I would run naked around the streets of Garching if they were to offer one."
	Appreciate 0 Quote

08-19-2024, 07:49 AM	#3
DementedF10 Private First Class 168 Rep 116 Posts Drives: 2012 BMW 535ix Join Date: Dec 2022 Location: Ohio iTrader: (0)	Yeah that offset is never going to allow what you are wanting. Im running 20x9 +32 with 255/35/20 up front and 20x10.5 +42 with 295/30/20. So you are pushed out 14mm more than mine. Thats a good bit Attached Images
	Appreciate 0 Quote

08-19-2024, 02:40 PM	#4
zener BMW enthusiast since 2004 428 Rep 222 Posts Drives: E65 730d, F10 520d, E34 520i Join Date: May 2022 Location: Finland iTrader: (0)	This mine with 9,5" et22, with 245/35r20 continental. It just fits and tire doesn't rub to inner fender and my finger fits between wheel arch and wheel. My current summer setup is 275/30r20 triangle and 10" et29 and it is also close call. 10" et18 is not gonna fit even with strech, because wheel will most likely hit wheel arch. Attached Images
	Appreciate 0 Quote