|
|
01-14-2022, 11:13 PM | #90 |
Second Lieutenant
1454
Rep 263
Posts |
Stance SF07 - 20x9 on Toyo Extensa 245/40 in the front and 20x10.5 on Toyo R888R 285/35ZR20 in the rear.
__________________
2011 550i (N63)
Upgraded 51mm turbos, Heatsync Stage 3 Flash, JB4 stacked, BMS WMI, Arm Charge Pipes, Heatsync Catless DPs, X-Pipe, Res Muffler Delete, xHP Stage 3 Trans Flash, Turbosmart Diverter Valves, 3.5 TMAPs, Oil Cooler, Heatsync Front Mounted Max Cool Intakes, Walbro LPFP and e40 mix rollin on Stance SF07 9x20 w/Toyo Extensa and 10.5x20 w/Toyo R888R. |
Appreciate
3
|
01-15-2022, 07:37 AM | #91 |
Major
1218
Rep 1,167
Posts |
They're decent. Not perfect but decent. I'm willing to bet that they're still a good value vs a KW V3 given they're half the price, but they really could use more compression damping.
One of these days I'll do a full review. |
Appreciate
0
|
01-15-2022, 10:13 AM | #92 | |
Private
29
Rep 66
Posts |
Quote:
Thanks |
|
Appreciate
0
|
01-16-2022, 09:18 AM | #93 | |
Registered
0
Rep 1
Posts |
Quote:
What ET do you have on these? I was offered a good deal for BBS CH for F11 but I don't know if they fit. Wheels are with the following specs: 20x9 ET24 front 20x10,5 ET24 Rear Does anyone know if they are suitable for the touring? |
|
Appreciate
0
|
01-16-2022, 10:44 AM | #95 | ||
General
1579
Rep 29,212
Posts |
Quote:
__________________
F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3DDesign Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals | |
||
Appreciate
0
|
03-11-2022, 09:09 AM | #96 |
Enthusiast
18
Rep 245
Posts |
__________________
2016 550i M-Sport
2008 328i M-Sport (Sold) 2007 Z4M Roadster (Sold) |
Appreciate
0
|
03-16-2022, 09:24 AM | #97 |
Second Lieutenant
209
Rep 221
Posts |
|
Appreciate
1
Taylorguy7417.50 |
03-17-2022, 02:54 PM | #100 |
Major
1218
Rep 1,167
Posts |
20's on 245/35 and 275/30 runflats (the original BMW setup) is pretty harsh on bad roads and tough on wheels. Lots of bent wheel/blown tire possibilities on potholes.
Using regular non-run flat tires is better as the tires can absorb impacts easier. Going with a taller tire is what I did, which is even better again. 275/35 is 1" larger diameter than stock 275/30, so more sidewall to absorb bumps and less chance of bent wheels. EDIT: BMW not BEM Last edited by Blue Angel; 03-17-2022 at 08:24 PM.. Reason: Spelling |
Appreciate
1
Kf10x3.00 |
03-30-2022, 05:51 PM | #103 | |
Private First Class
13
Rep 104
Posts |
Quote:
|
|
Appreciate
0
|
04-08-2022, 03:22 PM | #105 |
Registered
0
Rep 2
Posts |
Advice on fitment
Hi fam, I'm completely new to wheel choice and fitment, but I'm looking to move to 20" wheels on my F10. I'm thinking of the staggered wheels/tires, and whether they'd sit tucked, flush, etc. I'm hoping for flush or close to it, and I don't want any rubbing or having to run goofy camber or anything. Will these pretty much bolt on and be good to go?
2011 535i xdrive- stock drive height, but I'm considering lowering some TSW Chicane - Gloss black w/Mirror Cut Face on Michelin Pilot Sport AS3+ Front: 20x8.5 5x120 ET:35 245/35r20 Rear: 20x10 5x120 ET: 40 275/30r20 - or - 285/30r20 |
Appreciate
0
|
04-09-2022, 07:31 AM | #106 |
Major
1218
Rep 1,167
Posts |
Those sizes will fit fine, you shouldn't have any issues.
The stock spec for the front is 20x8.5 et33, so you're 2mm less in the front but it will still fit well as the front F10 fitment is pretty good from the factory. The stock staggered rear is 20x9 et44 and is too far inboard, needing a 10mm spacer to look correct. Your et40 setup only moves the tire outboard by 4mm, and aftermarket 275s are a bit wider than the OEM tire so it should look good. Some 285s are quite a bit wider than 275s, but should still be ok. Some have tried 285s on the 343m M5 rear wheels which are 20x10 et34 and they rub, forcing them to change to 275s. You have 6mm (1/4") less offset so either tire should be ok. |
Appreciate
0
|
04-11-2022, 12:37 PM | #107 | |
Registered
0
Rep 2
Posts |
Quote:
Thanks, I appreciate it. The shop has 275s as well as 285s. I could switch to the 275s. |
|
Appreciate
0
|
04-16-2022, 04:10 PM | #110 |
Second Lieutenant
1454
Rep 263
Posts |
Thanks.
__________________
2011 550i (N63)
Upgraded 51mm turbos, Heatsync Stage 3 Flash, JB4 stacked, BMS WMI, Arm Charge Pipes, Heatsync Catless DPs, X-Pipe, Res Muffler Delete, xHP Stage 3 Trans Flash, Turbosmart Diverter Valves, 3.5 TMAPs, Oil Cooler, Heatsync Front Mounted Max Cool Intakes, Walbro LPFP and e40 mix rollin on Stance SF07 9x20 w/Toyo Extensa and 10.5x20 w/Toyo R888R. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|