G30 brake fit F10/11?

stfoer · 08-24-2021, 07:01 AM

Anyone know if the G30 rear brake caliper fit the F10/11 with the 345x24mm disc? Thank you.

addy27 · 08-24-2021, 06:17 PM

Not quite, BUT, you can buy the M5 carrier and keep your current caliper and fit 370x24 from the F01 (High speed braking system) version.

stfoer · 08-25-2021, 04:38 AM

Yes I know that, but I like the look of these new ones with the M-logo.
No one tried these ones?

addy27 · 08-27-2021, 03:57 PM

I believe there is a thread where it was tried but it does not sit correctly. as in vertical gap and angle where the pads would touch the rotor isn't correct.

stfoer · 09-02-2021, 02:39 AM

I found a lot of info on the front, which fit using a 4mm spacer between caliper and hub. So far I have not been able to find anything for the rear. Do you have a link to that thread?

stfoer · 11-02-2021, 08:37 AM

Quote:

Originally Posted by stfoer

Anyone know if the G30 rear brake caliper fit the F10/11 with the 345x24mm disc? Thank you.

I can now confirm that the caliper carrier from the G30 DOES NOT fit the F10/11. The distance between the bolts are longer on the G30, so no way to fit them.

Now next will be to see if the G30 calipers will fit on the F10/11 carriers.

Stay tuned.

08-24-2021, 07:01 AM	#1
stfoer New Member 0 Rep 6 Posts Drives: BMW F11 Join Date: Jul 2021 Location: Norway iTrader: (0)	G30 brake fit F10/11? Anyone know if the G30 rear brake caliper fit the F10/11 with the 345x24mm disc? Thank you. Attached Images
	Appreciate 0 Tweet Quote

08-24-2021, 06:17 PM	#2
addy27 Captain 388 Rep 949 Posts Drives: F10 550i Join Date: Jan 2008 Location: Bay Area, CA iTrader: (2)	Not quite, BUT, you can buy the M5 carrier and keep your current caliper and fit 370x24 from the F01 (High speed braking system) version.
	Appreciate 0 Quote

08-25-2021, 04:38 AM	#3
stfoer New Member 0 Rep 6 Posts Drives: BMW F11 Join Date: Jul 2021 Location: Norway iTrader: (0)	Yes I know that, but I like the look of these new ones with the M-logo. No one tried these ones?
	Appreciate 0 Quote

08-27-2021, 03:57 PM	#4
addy27 Captain 388 Rep 949 Posts Drives: F10 550i Join Date: Jan 2008 Location: Bay Area, CA iTrader: (2)	I believe there is a thread where it was tried but it does not sit correctly. as in vertical gap and angle where the pads would touch the rotor isn't correct.
	Appreciate 0 Quote

09-02-2021, 02:39 AM	#5
stfoer New Member 0 Rep 6 Posts Drives: BMW F11 Join Date: Jul 2021 Location: Norway iTrader: (0)	I found a lot of info on the front, which fit using a 4mm spacer between caliper and hub. So far I have not been able to find anything for the rear. Do you have a link to that thread?
	Appreciate 0 Quote