|
|
|
2010 2011 BMW 5 Series Forum F10 Nbt to nbt Evo weird issue |
|
Post Reply |
|
Thread Tools | Search this Thread |
08-27-2021, 06:32 AM | #1 |
Enlisted Member
5
Rep 37
Posts |
Nbt to nbt Evo weird issue
Hi All,
I have retrofitted NBT evo into my f10 and all working great for the most part however i have one issue I'm trying to figure out When ever i open a door it shows the wrong door open on the cluster for example if open drivers door (RHD) it shows passenger door open and same again if i open passenger door it shows drivers door open. my car: 2015 f10 nbt evo unit from g30 speedo/cluster: 6WB came out of a RHD 530e (2019). HVAC panel controls are backwards too so pressing passenger heated seats turns drivers heated seat on donor vin for NBT EVO: WBAJA92070BN74258 my vin: WBA5D52060G356963 Any help or guidance would be greatly appreciated |
08-27-2021, 12:23 PM | #3 |
Enlisted Member
5
Rep 37
Posts |
Its weird if i put nbt (id4?) its fine and hvac and 6wb works as expected put evo in and everything is switched I've spent hours trying settings and typekey but all with same result
|
Appreciate
0
|
08-28-2021, 01:13 PM | #4 |
Enlisted Member
5
Rep 37
Posts |
i coded HU_NBT" and Kombi as LHD by editing typecode from 5D52 to 5D51 and that seems to have fixed the issue everything is back to normal now this is defiantly a weird issue.
While its not the correct solution its a working one. on a side not NBT is programmed to my vin so that should not have been issue |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|