|
|
|
2010 2011 BMW 5 Series Forum F10 K+Dcan cables not working |
|
Post Reply |
|
Thread Tools | Search this Thread |
02-19-2019, 09:25 AM | #1 |
Private
9
Rep 79
Posts |
K+Dcan cables not working
I bought a cable from bimmergeeks a month ago and when i tried using it, the red light flashes for a second when i inserted in, goes off and mhd app is saying no cable connected. No biggie, bad cable, right? I emailed them, pretty quickly i got a second cable, then a third, then a forth, all of them with the same problem. Bimmergeeks assured me the 4th cable works, but nope i still get the same problem. Now my question, do i really have the worst luck possible and got 4 faulty cables in a row, or there is another problem with my car/phone. Other scanners work no problem and the car used to have a jb4 untill a couple of months ago, everything worked. I'm using a galaxy s8+ and a usb-c adapter.
|
02-19-2019, 01:40 PM | #2 |
Private First Class
54
Rep 166
Posts
Drives: 2016 535I
Join Date: Feb 2017
Location: Tampa, FL
|
Then K+D CAN cables run off the OBDII power. make sure you have power on pins +12V on pin 16 and Ground on pins 4 and 5. They are 2 separate grounds so check both.
https://www.newtis.info/tisv2/a/en/f...i-lim/GAASxKuO Has all the wiring diagrams for the system. |
Appreciate
0
|
05-24-2019, 03:14 PM | #3 | |
New Member
2
Rep 8
Posts |
Quote:
|
|
Appreciate
0
|
05-24-2019, 03:27 PM | #4 | ||
Private
9
Rep 79
Posts |
Quote:
just bought a cheap one from amazon that was on bm3 website and that one worked perfectly. |
||
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|