|
|
01-28-2023, 04:20 PM | #1 |
New Member
0
Rep 8
Posts |
20x10 +40 F10 550i
Hey Guys I'm looking at a set of 20x10 (all 4) wheels from an M3CS for my F10 550i. They are 20x10 +40 offset with 245/35 F and 275/30R. Will these fit properly on the 550i or will I need to make any modifications? Spacers in front maybe? Just needed a little guidance before I pull the trigger.
Thanks in advance! |
02-06-2023, 05:31 AM | #2 |
Major
998
Rep 1,037
Posts |
A 10” wheel on the front is going to be an extremely tight fit. I’m using a 20x9.5 ET30 and there’s not much room on the inside. You’ll need a 12-15mm spacer for a 28-25mm ET. You might get away with a 10mm spacer for ET30, but I doubt it.
Are you planning to use staggered tires on square wheels? That’ll look funny in my opinion. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|