[Dio781]

Hi Guys
Will a set of 343 wheels of a 2013 M6 fit a 2016 535i xdrive without any issues ?
I really like how they look
Thanks

[Hoa]

M6 offset will be too aggressive. The rear will poke out a lot. M5 wheels which have the same design but higher offset will fit better.

[ZAmax411517]

I guess M5 will fit okay

[Qsilver7]

You can use the fronts on all 4 corners for a square set. Its' the rear wheels that have a lower wheel offset (if you go to one of the online part database sites (like www.realoem.com or www.bimmercat.com )...you can pull up the 343 wheel diagram to get the specs of the front & rear wheel. You can then compare them to the specs of the existing 20 inch wheels for the 535ix. I think most of the 20" wheels for the f10 have a 33mm front wheel offset and a 44mm rear wheel offset.

If you pull up the M6 wheel's specs...I think the rear wheel has a 19mm wheel offset. Again, the front wheel's offset is the same or close to the f10's wheel's offset specs.

(I'm going off a foggy memory about some of the wheel offset specs...so verify in case I'm off a few millimeters)

[Dio781]

Thank you all for all the help
I will try finding m5 wheels instead
Like I said I love the way they look

[bake]

Agreed. I have been running my M5 wheels for 7 years now.