TPMS reading pressure & Temp

4Romie · 09-25-2019, 08:54 PM

Quote:

Originally Posted by ezaircon4jc

You can't. You have to code them in before you know if it'll work. Coding didn't work on my 2012 (all I got were --ºF and --psi) until I changed the sensors. Once I did that the readouts work.

I did the coding on my 2013 535i and I didn't even get the
--ºF and --psi

ezaircon4jc · 09-25-2019, 11:23 PM

Quote:

Originally Posted by 4Romie

I did the coding on my 2013 535i and I didn't even get the
--ºF and --psi

Did you wait a bit? Sometimes the coding takes a predetermined time to take affect.

4Romie · 09-26-2019, 11:26 AM

Quote:

Originally Posted by ezaircon4jc

Did you wait a bit? Sometimes the coding takes a predetermined time to take affect.

It's been a couple of days and still nothing.

ezaircon4jc · 09-26-2019, 02:46 PM

Quote:

Originally Posted by 4Romie

It's been a couple of days and still nothing.

I got nothin'... Other than uncode and then recode again. IIRC, there's only one module that needs coding. What did you use for the coding? Stupid question, but did you select the "code" function?

4Romie · 09-26-2019, 04:24 PM

Quote:

Originally Posted by ezaircon4jc

I got nothin'... Other than uncode and then recode again. IIRC, there's only one module that needs coding. What did you use for the coding? Stupid question, but did you select the "code" function?

I took your advise and uncode and recode but got the same result.

4Romie · 09-26-2019, 04:48 PM

This is how it looks like after coding
No change at all

is their a setting in the Idrive that needs adjusting ?

OnlyGerman · 09-26-2019, 07:37 PM

Ok so my 2012, 11/11 build, after coding on bimmercode shows all values. I am shocked. I did not think this would work without getting different sensors as others have stated. I just had the car updated at my indy, supposedly a full update with all ecus. I coded for this after that was done... maybe that update is the reason.

EDIT: So I wanted to see if the car update had something to do with this as I did not check. So I uncoded and all values went away, coded again and it showed --, but shortly after driving all values reappeared. So this was purely due to the coding on bimmercode.

Have those with "--" tried resetting the TPMS?

lsturbointeg · 09-28-2019, 07:26 AM

Quote:

Originally Posted by XLife14

Ok so my 2012, 11/11 build, after coding on bimmercode shows all values. I am shocked. I did not think this would work without getting different sensors as others have stated. I just had the car updated at my indy, supposedly a full update with all ecus. I coded for this after that was done... maybe that update is the reason.

EDIT: So I wanted to see if the car update had something to do with this as I did not check. So I uncoded and all values went away, coded again and it showed --, but shortly after driving all values reappeared. So this was purely due to the coding on bimmercode.

Have those with "--" tried resetting the TPMS?

do you have the smaller 6" screen?

ezaircon4jc · 09-28-2019, 01:23 PM

Quote:

Originally Posted by XLife14

Ok so my 2012, 11/11 build, after coding on bimmercode shows all values. I am shocked. I did not think this would work without getting different sensors as others have stated. I just had the car updated at my indy, supposedly a full update with all ecus. I coded for this after that was done... maybe that update is the reason.

EDIT: So I wanted to see if the car update had something to do with this as I did not check. So I uncoded and all values went away, coded again and it showed --, but shortly after driving all values reappeared. So this was purely due to the coding on bimmercode.

Have those with "--" tried resetting the TPMS?

If all that is displayed are the green tires without the --ºF or ---psi resetting won't work.

OnlyGerman · 09-29-2019, 01:19 AM

Quote:

Originally Posted by lsturbointeg

do you have the smaller 6" screen?

Nope, CIC nav

4Romie · 09-29-2019, 09:40 AM

Quote:

Originally Posted by ezaircon4jc

If all that is displayed are the green tires without the --ºF or ---psi resetting won't work.

older F10 seams to work ???
Do you think it may have something to do with the censers in the tires?
I didn't buy the car new so don't know if they are original BMW censers

ezaircon4jc · 09-29-2019, 03:04 PM

Quote:

Originally Posted by XLife14

Nope, CIC nav

Hmmmm.... works fine in our 2012 CIC. I did have to replace the sensors as the display only showed the colored tires and --ºF, etc. until I did.

Quote:

Originally Posted by 4Romie

older F10 seams to work ???
Do you think it may have something to do with the censers in the tires?
I didn't buy the car new so don't know if they are original BMW censers

I did have to replace the sensors as the display only showed the colored tires and --ºF, etc. until I did. The Costco sensors (long story) work just fine. When we bought the 2014 I only had the colored tires until I coded the readouts.

4Romie · 09-30-2019, 11:38 AM

Quote:

Originally Posted by ezaircon4jc

You can't. You have to code them in before you know if it'll work. Coding didn't work on my 2012 (all I got were --ºF and --psi) until I changed the sensors. Once I did that the readouts work.

well I need some tire sensors from COSTCO..lol
what was the cost?

ezaircon4jc · 09-30-2019, 06:38 PM

Quote:

Originally Posted by 4Romie

well I need some tire sensors from COSTCO..lol
what was the cost?

I really don't remember; it was around 3 years ago. I do remember they were marginally less expensive than the set from Turnermotorsport.

yancdog · 10-16-2019, 01:52 PM

What is the steps to code for this in Bimmercode? I have been looking everywhere for this but can only find info on F30's.

ezaircon4jc · 10-16-2019, 02:02 PM

Quote:

Originally Posted by yancdog

What is the steps to code for this in Bimmercode? I have been looking everywhere for this but can only find info on F30's.

Look under HU_NBT...

09-26-2019, 04:48 PM	#28
4Romie Private 112 Rep 68 Posts Drives: 2013 F10 535I / Lime Rock M3 Join Date: May 2016 Location: Lake Worth Florida iTrader: (0) Garage List 2013 BMW M3 [0.00] 2013 BMW 535 [0.00]	this what i get This is how it looks like after coding No change at all is their a setting in the Idrive that needs adjusting ? Attached Images
	Appreciate 0 Quote

09-26-2019, 07:37 PM	#29
OnlyGerman Major 362 Rep 1,259 Posts Drives: F15, F13, F10, E60 Join Date: Jul 2019 Location: Sunshine State iTrader: (0)	Ok so my 2012, 11/11 build, after coding on bimmercode shows all values. I am shocked. I did not think this would work without getting different sensors as others have stated. I just had the car updated at my indy, supposedly a full update with all ecus. I coded for this after that was done... maybe that update is the reason. EDIT: So I wanted to see if the car update had something to do with this as I did not check. So I uncoded and all values went away, coded again and it showed --, but shortly after driving all values reappeared. So this was purely due to the coding on bimmercode. Have those with "--" tried resetting the TPMS? Last edited by OnlyGerman; 09-27-2019 at 07:40 AM..
	Appreciate 0 Quote

10-16-2019, 01:52 PM	#37
yancdog Registered 0 Rep 1 Posts Drives: 13 BMW 528i Join Date: Oct 2019 Location: TN iTrader: (0) Garage List 2013 BMW 528i [0.00]	What is the steps to code for this in Bimmercode? I have been looking everywhere for this but can only find info on F30's.
	Appreciate 0 Quote