![]() |
![]()
|
![]() |
![]() |
2010 2011 BMW 5 Series Forum F10
![]() |
![]() |
Post Reply |
|
Thread Tools | Search this Thread |
01-13-2024, 10:58 PM | #1 |
Private First Class
![]() 23
Rep 152
Posts |
![]()
Hey guys,
I have a 2016 BMW 550i xdrive with 80k miles and my front struts need replacement due to creeking and vibrations and i want to install Dinan Lowering Springs. I know it comes with front and rear springs and i was wondering, would it be a problem to install only the front springs and not the rear at the same time? I want to do the rear also but i dont want to blow a ton of money all at once on because i would replace the rear struts when installing the rear struts. Any thoughts on installing only the front dinan lowering springs and not the rear until later? Also i have DHP the dynamic handling package on my f10 with active roll bars, would installing only the front dinan lowering spring without the rear affect it negatively? Last edited by SocomCA; 01-13-2024 at 11:30 PM.. |
01-26-2024, 01:03 PM | #2 | |
Private First Class
![]() ![]() 170
Rep 131
Posts
Drives: BMW 550 xdrive
Join Date: May 2023
Location: Moscow
|
Quote:
hi, it’s better to install all the springs at once... I can’t say about Dinan, I use Eibach myself, I really like it, it’s moderately stiff and pleasantly handling car |
|
Appreciate
0
|
01-26-2024, 05:18 PM | #3 |
Private First Class
![]() 23
Rep 152
Posts |
Would it be a problem if i only do the front because i am replacing the front struts and was going to do it at the same time and the rear i was going to do after since i was quoted $1000 in labor for the rear spring install.
|
Appreciate
0
|
01-26-2024, 05:47 PM | #4 |
|
![]() 117
Rep 208
Posts |
That is pretty high for the rears... The fronts are a PITA but the rears are much easier...
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
550 xdrive, dinan, dinan springs, f10, struts |
|
|