Anyone mounted original M5 343M 20" rims on an F10/F11

g75y · 05-18-2012, 04:37 AM

From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks

RR80 · 06-05-2012, 02:18 AM

Quote:

Originally Posted by g75y

From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks

Yes, somebody did it already. I think 275/30/20 would be safe but not sure on the 285 setup.

marqueex82 · 06-05-2012, 10:12 PM

where's the best place to purchase a set of M5 wheels?

LACSTER · 06-05-2012, 11:21 PM

Quote:

Originally Posted by marqueex82

where's the best place to purchase a set of M5 wheels?

The dealer would be the only place I can think of to get OEM M5 wheels but they will run you over $4000 for a set of 20's.

There's reps but I can only find 19's

http://f10.5post.com/forums/showthread.php?t=679914

marqueex82 · 06-06-2012, 12:00 AM

Quote:

Originally Posted by LACSTER

The dealer would be the only place I can think of to get OEM M5 wheels but they will run you over $4000 for a set of 20's.

There's reps but I can only find 19's

http://f10.5post.com/forums/showthread.php?t=679914

Thanks cousin! Thanks for that info!!!

g75y · 06-06-2012, 04:36 AM

Quote:

Originally Posted by RR80

Yes, somebody did it already. I think 275/30/20 would be safe but not sure on the 285 setup.

Thanks. It looks good.

Hunter5179 · 06-06-2012, 11:39 AM

Did this guy use spacers or just slap them on as is?

RR80 · 06-06-2012, 09:51 PM

Quote:

Originally Posted by Hunter5179

Did this guy use spacers or just slap them on as is?

I think you don't need to put spacers since the OEM offset for the m5 wheels are on the low side.

perisak · 06-19-2012, 03:53 PM

Quote:

Originally Posted by g75y

From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks

I would also like to know this, and if it also fit the new M550dx?
anyone who know for sure?

RumbleJay · 06-19-2012, 07:37 PM

Just saw some 20's rep on eBay. Item number: 110898538733. Not sure about the quality probably LPC.

bobblehead · 06-19-2012, 08:54 PM

Just based on those spec. - the front has no issue at all. The rear is going to be pretty close border line clearing without rubbing. If you intend to lower the suspension later, then for sure, it will rub against the fender.

Quote:

Originally Posted by perisak

I would also like to know this, and if it also fit the new M550dx?
anyone who know for sure?

perisak · 06-20-2012, 04:21 AM

Quote:

Originally Posted by bobblehead

Just based on those spec. - the front has no issue at all. The rear is going to be pretty close border line clearing without rubbing. If you intend to lower the suspension later, then for sure, it will rub against the fender.

How could then ACS sell there wheel kit:
FA: 9,0 x 20" offset 22 with 255/35 R 20
RA: 10,0 x 20" offset 33 with 285/30 R 20

seems like this is very close in the rear as the M5 wheel with ET34.
only 1mm different.

bobblehead · 06-20-2012, 06:01 AM

The ACS setup

Front: +5mm from strut/+17mm outward extension
Rear: -2mm from strut/+24mm outward extension

Therefore, I think for rear, that +24mm outward extension is the highest limit that you can go with. Btw, ACS did lowered the car but their springs only lowered about 1 inch without any fender rolling. However, if you are thinking of lowering beyond that reference, there is a good chance it will rub.

Damrong · 06-20-2012, 10:54 AM

Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.

perisak · 06-21-2012, 02:57 AM

Quote:

Originally Posted by Damrong

Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.

Xdrive or RWD?

Please post pictures

remmib · 06-21-2012, 05:06 AM

Quote:

Originally Posted by Damrong

Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.

Cool, wonder how it looks.

Quote:

Originally Posted by perisak

Xdrive or RWD?

Please post pictures

Same fitment on both xdrive and rwd as far as I know.

Damrong · 06-21-2012, 09:34 AM

Sorry I am quite busy today and try to take few picture for you. Picture might not so nice due to I've taken from mobile phone.

perisak · 06-21-2012, 09:41 AM

Quote:

Originally Posted by remmib

Quote:

Originally Posted by Damrong

Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.

Cool, wonder how it looks.

Quote:

Originally Posted by perisak

Xdrive or RWD?

Please post pictures

Same fitment on both xdrive and rwd as far as I know.

I've read in other threads that it's best to have 245 in front and 285 at rear if you have xdrive. So it's same diameter. But i'm not sure how important this is.
I wonder if this F11 is lowered..?

sbrown35 · 06-21-2012, 09:57 AM

Quote:

Originally Posted by RumbleJay

Just saw some 20's rep on eBay. Item number: 110898538733. Not sure about the quality probably LPC.

Those are only 9.5" width for rear... Real ones are 10" width

Damrong · 06-21-2012, 10:44 AM

Mine is 10" for the rear exactly as M5 and it is Forged Rims. Suspension are original I never touch anything.

vinred26 · 06-21-2012, 11:10 AM

Hello Guys,

I have a deal to buy Front : 255/40/19 Rear 285/35/19 wheel and tire set from M6. Wanted to know if any of you have tried to fit 2012 535 Xdrive.

I see tire width as 255 and 285 for M6 whereas most of the staggered I saw for 535 was 245 and 275.

Please let me know your thoughts and experience or suggestions.

Thanks in advance

perisak · 06-21-2012, 01:35 PM

Quote:

Originally Posted by Damrong

Mine is 10" for the rear exactly as M5 and it is Forged Rims. Suspension are original I never touch anything.

Is it original BMW M5 wheel or a copy?

05-18-2012, 04:37 AM	#1
g75y New Member 23 Rep 7 Posts Drives: F80 Join Date: May 2012 Location: The East iTrader: (0)	Anyone mounted original M5 343M 20" rims on an F10/F11 From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure? Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre? Thanks
	Appreciate 0 Tweet Quote

06-05-2012, 10:12 PM	#3
marqueex82 Private First Class 8 Rep 103 Posts Drives: BMW future owner Join Date: Feb 2012 Location: USA iTrader: (0)	where's the best place to purchase a set of M5 wheels?
	Appreciate 0 Quote

06-06-2012, 11:39 AM	#7
Hunter5179 Lieutenant Colonel 126 Rep 1,583 Posts Drives: 2013 M6 Coupe Join Date: Nov 2011 Location: Chicago iTrader: (0)	Did this guy use spacers or just slap them on as is? __________________ 2013 M6 Coupe SG, VSE 003's 21, Akropovic Evo Carbon, KW V3, AMS DP's, Vorsteiner Full Aero, Gruppe M Intake, Bel Stir Plus & V1 with HP Laser Interceptors, P3Cars Gauges, JL 2X12W6Subs, 35%tints. My Thread: http://www.6post.com/forums/showthread.php?t=794659
	Appreciate 0 Quote

06-19-2012, 07:37 PM	#10
RumbleJay Private First Class 27 Rep 131 Posts Drives: 2011 BMW f10 550i M Join Date: Mar 2012 Location: Wahoo, Virginia iTrader: (2) Garage List 2003 BMW M3 Vert 6 spd [0.00] 2011 BMW 550i M Sport [0.00]	Just saw some 20's rep on eBay. Item number: 110898538733. Not sure about the quality probably LPC.
	Appreciate 0 Quote

06-20-2012, 06:01 AM	#13
bobblehead Brigadier General 258 Rep 4,721 Posts Drives: warp speed Join Date: Aug 2009 Location: Toronto, On iTrader: (0)	The ACS setup Front: +5mm from strut/+17mm outward extension Rear: -2mm from strut/+24mm outward extension Therefore, I think for rear, that +24mm outward extension is the highest limit that you can go with. Btw, ACS did lowered the car but their springs only lowered about 1 inch without any fender rolling. However, if you are thinking of lowering beyond that reference, there is a good chance it will rub.
	Appreciate 0 Quote

06-20-2012, 10:54 AM	#14
Damrong Registered 4 Rep 4 Posts Drives: F11 Join Date: Jun 2012 Location: Thailand iTrader: (0)	Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.
	Appreciate 0 Quote

06-21-2012, 09:34 AM	#17
Damrong Registered 4 Rep 4 Posts Drives: F11 Join Date: Jun 2012 Location: Thailand iTrader: (0)	Sorry I am quite busy today and try to take few picture for you. Picture might not so nice due to I've taken from mobile phone. Attached Images
	Appreciate 1 smalls33780.00 Quote

06-21-2012, 10:44 AM	#20
Damrong Registered 4 Rep 4 Posts Drives: F11 Join Date: Jun 2012 Location: Thailand iTrader: (0)	Mine is 10" for the rear exactly as M5 and it is Forged Rims. Suspension are original I never touch anything.
	Appreciate 0 Quote

06-21-2012, 11:10 AM	#21
vinred26 Private 0 Rep 53 Posts Drives: BMW 5 Series Join Date: Apr 2012 Location: Columbia iTrader: (0)	M6 wheels for 535 2012 Hello Guys, I have a deal to buy Front : 255/40/19 Rear 285/35/19 wheel and tire set from M6. Wanted to know if any of you have tried to fit 2012 535 Xdrive. I see tire width as 255 and 285 for M6 whereas most of the staggered I saw for 535 was 245 and 275. Please let me know your thoughts and experience or suggestions. Thanks in advance
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search