|
|
|
2010 2011 BMW 5 Series Forum F10 ACS springs with EDC long term reviews |
|
Post Reply |
|
Thread Tools | Search this Thread |
09-14-2018, 12:18 AM | #1 |
First Lieutenant
145
Rep 345
Posts |
ACS springs with EDC long term reviews
Just curious all of you who have had ACS springs installed with EDC could give any long term reviews of the setup. Such as have you had any issues with the EDC shocks? Premature wear and so forth. Thanks in advanced. The ride height is just killing me with the body roll.
|
09-14-2018, 12:32 AM | #2 |
Captain
328
Rep 697
Posts
Drives: 2013 535xi
Join Date: Dec 2009
Location: Nanoose Bay, BC
|
I have about 20k kms (12k miles) on my ACS springs with EDC on my F10 and have not had any issues with the shocks and other suspension parts. My car was just inspected two days ago and no problems were found.
__________________
2013 535xi, Carbon Black, beige interior, M Sport package, HUD, DDC & ARS, ACS springs, Kelleners wheels
2010 Z4 35i, Crimson Red, beige interior, 6sp manual, Adapative Suspension 2000 528i, Cosmo Black, beige interior, Sport package (retired) |
Appreciate
0
|
09-14-2018, 03:01 PM | #4 |
Captain
328
Rep 697
Posts
Drives: 2013 535xi
Join Date: Dec 2009
Location: Nanoose Bay, BC
|
So far, I have not noticed any abnormal wear.
__________________
2013 535xi, Carbon Black, beige interior, M Sport package, HUD, DDC & ARS, ACS springs, Kelleners wheels
2010 Z4 35i, Crimson Red, beige interior, 6sp manual, Adapative Suspension 2000 528i, Cosmo Black, beige interior, Sport package (retired) |
Appreciate
0
|
09-14-2018, 04:47 PM | #5 |
Major
771
Rep 1,155
Posts |
i've had mine from 18k miles to now (36k miles) and no issues....i have a 2014 550i with EDC...also installed dinan shockware recently....haven't seen any un even tire wear or other issues...
I did have the alignment done to factory spec...my shop gave me 2 options...1 for tire wear (factor specs) another one for handling performance...so i went with option 1... |
Appreciate
0
|
10-04-2018, 01:55 AM | #6 |
Registered
0
Rep 3
Posts |
Is there any coding or calibration required to fully optimized the shock with the lowering springs?
Technically speaking, the 'resting' position of the shock has changed/compressed and maybe the VDC module needs to learn the new resting position for best results. |
Appreciate
0
|
10-04-2018, 02:00 AM | #7 |
Captain
388
Rep 951
Posts |
Might be that Dinan Shockware SW takes care of that.. but I've had Dinan springs and bump stops and dinar shockware for about 12k miles, no issues with tire ware knock on wood. I followed the Dinan recommended Alignment specs.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|