[steven313]

Hello Together,

I've been in trouble with my F10 530d since yesterday.
First Of all I thought my aircondition does not work, so I refilled the AC with new coolant and it came out that it has no leaks because only 20g of the coolant were missing. My first thought was a damaged ac condenser....

Afterwards I read my fault memory and serveral electronical problems revealed :
(translated from german into english)

JBE: Failure Code: 802104 -> no current coding Data
C90C7E : wrong windshield wiper installed ??????
C90CAC: Front Mirror - non expectet LIN component
C90CAD : Rain-Light_Solar Sensor : non expected LIN comnponent
C90D9D: Auc SENSOR : unproperly installed
C90D9D: Seatheating passenger seat : Non Expected LIN component

E71408: Message (Status Passengerseat, 0x22A) missing, Receiver IHKA, Sender JBE

E71409 Message( Status Pressure cooling ciruit, 0x2D2) missing, Receiver IHKA, Sender : JBE

E7140E Message ( Status AUC Sensor, 0x2D0) missing , Receiver IHKA, Sender: JBE

E714 SIGNAL (Status magnetic clutch. 0x2D6) invalid, Sender JBE

My car is a 2014 530D LCI (VIN : D77600)

I hope somebody is able to help me

Thank you in advance!

Kind regards from Germany

Steven

[steven313]

ok Issue is solved.

I found out that I have to assign a new CAFD to the JBBF.

Now everything works properly and my A/C gives me a cold breeze while my girl is heating her butt with the passenger seat heating

[Dmdk]

Hi can you please explain how you did this? I have the same issue and codes 801224, E71409 and E71420.

[Dmdk]

Hi, can you please explain how you did this?
I have the same issue and codes 801224, E71409 and E71420.
2014 535d