[MaximumFreckles]

Well, I finally pulled the trigger and got some new wheels. It was a deal I could not resist. So my 351m staggered setup with tpms and tires will be for sale shortly That being said, I decided to go with 20x9 square so that I can rotate tires. The car will be lowered on h&r sport springs. I just want to make sure I get the correct tire size. Here are the specs on the new Dinan rims.

F10 535i M-Sport 19" M Double Spoke Style 351M Cast Wheel Set
Front Wheels - 8.5JX19 ET:33 - 245/40R19 - 32 lb
Rear Wheels (if staggered setup ordered) - 9JX19 ET:44 - 275/35R19 - 32 lb
Nitto Motivo

Dinan
20x9 - ET:44 - 27.3 lbs

FRONT RESULTS
Inner Clearance: 17mm LESS
Outer Position: Retract by 5mm

REAR RESULTS
Inner Clearance: SAME
Outer Position: SAME

I will be running the same spacers, 10mm up front and 15mm in rear. I was thinking a 255/35/20. What are your thoughts? Thanks

[MaximumFreckles]

Anyone? I want to get tires put on asap. Thanks.

[BMW535iva]

I have the same rims staggered though these are some of the lightest 20's you can get.
Here is the link
https://f10.5post.com/forums/showthread.php?t=161353

[lsturbointeg]

Sweet! Looking forward to see these on the car

[MaximumFreckles]

Thanks, hopefully this week. Thoughts on tire size?

[MaximumFreckles]

Sneak peek. Car is getting lowered tomorrow, then new rims will go in Thursday with alignment.

[lsturbointeg]