[Thad]

I'm going to leave you alone about this and this is the last question I'm going to ask you. I wanted to know what you think would be acquired to accomplish this same fitment on my 2011 bmw 535i .... rear wheel drive with no special suspension. What sizes and off sets do you think I would need to run to accomplish this? The big thing I see vs most I've googled is the front wheel shown has a bit of concave and I really like that. I don't want the front to rear to be ultra aggressive where the front wheel has zero concave....Please help me I need to order.....Tire size and offset info and wheel size and width if you can help. What would I need to do? Run spring? Please help and I'm off your nerves please please.....




----------------------------------

the below audi seems to have the concave to the front wheel pictured below

[IMG]http://www.**********s.com/images/Products/Avant%20Garde/M615/Audi/Brushed%20Stainless/avant-garde-m615-audi-s4.jpg[/IMG]

----------------------------------
below is what i want to avoid on the front. Front to flat lo

l NEED CONCAVE ON THE FRONT AND UNDER THE CAR LIKE PICTURED ABOVE PLEASE HELP.

https://i.ebayimg.com/images/g/mC8AA...r2/s-l1600.jpg

https://www.vividracing.com/wm.php/i...M615_car_4.jpg

------------------------------------------
please please give me some guidance /input on this..springs wheel width etc....offset to accomplish the above look on a regular 2011 535i with all stock suspension stuff so far. Everything required please give me some input / reccomendations.

[remmib]

PM'ed.

[Rob09msport]

That car is dropped

[Thad]

What is the widest wheel I could go on my F10 non M :-( and not have rubbing issues. I so want a little concave on the front....Like the pictured. I would like to keep it under the car to or as close to perfectly flush as possible. Thanks Guys,,,,,You think he dropped it on springs and how would yall guess it rides?

[lsturbointeg]

Keep in mind the M5 is wider up front so offsets will be different than a normal f10

[Rob09msport]

I have 9.5 front and 10.5 rear .usually you need at least 9.5 to get the most concave profiles on rims. I posted pics for someone else my car is perfect flush and I have no rubbing

[Thad]

Damn I really love coming in here and stalking all of dope post you guys man......Now Rob09msport lol where are these pictures and thanks lsturbointeg.....I really appreciate it.

[Thad]

on the 9.5 front are you running 245 or 235? Any Images

[lsturbointeg]

Originally Posted by Rob09msport

I have 9.5 front and 10.5 rear .usually you need at least 9.5 to get the most concave profiles on rims. I posted pics for someone else my car is perfect flush and I have no rubbing

depending on the wheel brand sometimes they like to keep the front wheels with a flat face like the ForgeStars instead of concave. I got lucky because I specifically told my sponsor that I wanted the most concave wheels in the front since the rears would be more concave so they really had to dial in the offsets

[Rob09msport]

Originally Posted by Thad

Damn I really love coming in here and stalking all of dope post you guys man......Now Rob09msport lol where are these pictures and thanks lsturbointeg.....I really appreciate it.

Here ya go

[Wht550jersey]

Originally Posted by lsturbointeg

depending on the wheel brand sometimes they like to keep the front wheels with a flat face like the ForgeStars instead of concave. I got lucky because I specifically told my sponsor that I wanted the most concave wheels in the front since the rears would be more concave so they really had to dial in the offsets

Car is beautiful