|
|
|
2010 2011 BMW 5 Series Forum F10 Coding with E-sys new battery capacity failed |
|
Post Reply |
|
Thread Tools | Search this Thread |
07-30-2020, 03:48 PM | #1 |
Registered
1
Rep 2
Posts |
Coding with E-sys new battery capacity failed
I have bought a new battery of 105h AGM and I have to code the new capacity.
I tried to code new capacity from 90ah AGM to 105ah AGM but in ISTA when it says that new battery has 80ah. (Currently registered battery capacity in the EDME: 80 ah AGM !?!?!?!) I have modified the value in E-sys VCM_BATTERY_CLASS from 90ah_agm to 105ah_agm but when I am going to ISTA D it is saying: Currently registered battery capacity in the EDME: 80 ah AGM . Before modify to 105ah_agm the value was to 90ah AGM . Any ideas why it says 80ah even if I coded to 105ah ? |
07-31-2020, 08:29 PM | #2 |
Captain
388
Rep 951
Posts |
You probably have seen this but figured I'd ask if you followed instructions per this thread:
https://www.bimmerfest.com/forums/sh...d.php?t=844169 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|