[kondor]

Called Forgestar and this setup (SDC all around) is not possible on F10 550 due to the size of the front calipers.
Guess I'll have to settle for deep front and super deep rear

The plan was to run SDC 20x9.5 et25 & 20x10.5 et36

[exia_m3]

I'm about to place my order with forgestar and they are giving me my specs with
Front deep 20x9.5 et 22 and rear SDC 20x11 et 40

Currently running rohanas at 20x9 et 25 and 20x10 et 35.

I feel with the SDC at et 40 I'm pretty dang close to the strut should I ask for a custom rear around 36-38?

[combatbmw]

Originally Posted by xenoz535

I'm about to place my order with forgestar and they are giving me my specs with
Front deep 20x9.5 et 22 and rear SDC 20x11 et 40

Currently running rohanas at 20x9 et 25 and 20x10 et 35.

I feel with the SDC at et 40 I'm pretty dang close to the strut should I ask for a custom rear around 36-38?

Too bad your not local im selling mine check classifieds.

[Aiden.Detailing]

Originally Posted by LACSTER

LOL! Its 20x9.5 et11 fronts and 20x10.5 et31 rear.

NOTE: I would do 20x10.5 et34 if I could do it again.

the ET34 is cause u rub on the ET31? and did u even roll ur front fenders at all? and last question whats ur alignment specs in degrees?

[combatbmw]

Originally Posted by Aiden.Detailing

the ET34 is cause u rub on the ET31? and did u even roll ur front fenders at all? and last question whats ur alignment specs in degrees?

They don't rub, I have the same wheels, same everything. And now for sale because I got a new car.

[Aiden.Detailing]

combatbmw WHICH OFFSET ARE RUNNING THE ET34 OR ET31?

[vivin wilson]

guys please help me out

i have ordered ADV.1 in 19" for my F10 530d M Sport and my offset is as follows

19*9 ET +32 and 19*10.5 ET +40

i want more concaveness without fender rubbing... can anybody please recommend me the best aggressive offset setup ???

[lsturbointeg]

Originally Posted by vivin wilson

guys please help me out

i have ordered ADV.1 in 19" for my F10 530d M Sport and my offset is as follows

19*9 ET +32 and 19*10.5 ET +40

i want more concaveness without fender rubbing... can anybody please recommend me the best aggressive offset setup ???

Start a new thread! So people can help u

[LACSTER]

Originally Posted by vivin wilson

guys please help me out

i have ordered ADV.1 in 19" for my F10 530d M Sport and my offset is as follows

19*9 ET +32 and 19*10.5 ET +40

i want more concaveness without fender rubbing... can anybody please recommend me the best aggressive offset setup ???

ADV.1 should be able to help with that question.

[Aiden.Detailing]

LACSTER hey when you fitted the SDC on the f10 did u fender roll front and rear or just add camber?

[remmib]

Originally Posted by vivin wilson

guys please help me out

i have ordered ADV.1 in 19" for my F10 530d M Sport and my offset is as follows

19*9 ET +32 and 19*10.5 ET +40

i want more concaveness without fender rubbing... can anybody please recommend me the best aggressive offset setup ???

What tire sizes are you planning to run?

[LACSTER]

Originally Posted by Aiden.Detailing

LACSTER hey when you fitted the SDC on the f10 did u fender roll front and rear or just add camber?

Hey, I didn't do any work to the fenders. Just a little stretch with the tires and my car was on coils rather than springs.

[Aiden.Detailing]

LACSTER ok cool now u had said once u will do et43 instead of et31, was it cause the rear would rub? on dips?

[combatbmw]

Originally Posted by Aiden.Detailing

LACSTER ok cool now u had said once u will do et43 instead of et31, was it cause the rear would rub? on dips?

I had mine on, no rubbing no issues and now for sale if you want to save some $$$. and the 30-45 days of waiting for them to make emm.

[Aiden.Detailing]

Originally Posted by combatbmw

I had mine on, no rubbing no issues and now for sale if you want to save some $$$. and the 30-45 days of waiting for them to make emm.

combatbmw yea but were u lowered? or on spring /Coilovers/OEM suspension?

[combatbmw]

Originally Posted by Aiden.Detailing

combatbmw yea but were u lowered? or on spring /Coilovers/OEM suspension?

Had it before lowered, then lowered w/H&R springs, its fine. 100%.
My rims w/my offsets and what I wrote above has a 0% issue.
The only issue I have with it is, they dont fit on my new car because the damn calipers are too big. So I have to sell them.

-combat

[Aiden.Detailing]

Originally Posted by combatbmw

Had it before lowered, then lowered w/H&R springs, its fine. 100%.
My rims w/my offsets and what I wrote above has a 0% issue.
The only issue I have with it is, they dont fit on my new car because the damn calipers are too big. So I have to sell them.

-combat

combatbmw you wouldn't happen to know your offsets would you?

[combatbmw]

20x9.5 Super Deep +10 front offset
20x10.5 Super Deep +31 rear offset

[Aiden.Detailing]

Originally Posted by combatbmw

20x9.5 Super Deep +10 front offset
20x10.5 Super Deep +31 rear offset

combatbmw wicked mines too. and what brand tire n size u run imma run nit invo 245/35 n 285/30

[combatbmw]

Originally Posted by Aiden.Detailing

combatbmw wicked mines too. and what brand tire n size u run imma run nit invo 245/35 n 285/30

You asked me that twice, reason I didn't answer is because I told you my set up is in the forsale section.
So if you went there you could of seen the tires and size.

Bridgestone Potenza 760 Sport
Front: 245/35/20
Rear: 285/30/20

[vivin wilson]

245/40/19 F and 275/35/19 R

[sanyomats]

Originally Posted by LACSTER

LOL! Its 20x9.5 et11 fronts and 20x10.5 et31 rear.

NOTE: I would do 20x10.5 et34 if I could do it again.

LACSTER - you are awesome for trying out!!!

I would love to replicate the same setup. What finish did you get? Is that standard gunmetal?
Also, would the specs above work on my car with H&Rs? Unfortunately, I have a X-drive and unable to get coils.

Any feedback from you or any fanatics, would be much appreciated!!!